VRRIIS WL087Pro Wireless HDMI Video Transmission System for DJI Osmo Pocket 3

The VRRIIS WL087 Pro is a wireless HDMI video transmission system for the DJI Osmo Pocket 3. The VRRIIS WL087 Pro is a compact wireless HDMI system designed for low-latency video transmission for filming, streaming, monitoring, and on-site production. The transmitter features a Type-C male connector for direct connection to the DJI Osmo Pocket 3 and additional support for 1080p60Hz HDMI sources, including computers, media players, game consoles, set-top boxes, and other equipment. This convenient solution is ideal for vloggers, camera operators, educators, streamers, and teams who need a stable video signal without the hassle of cables. The system supports Full HD 1080P@60Hz transmission at a distance of up to 500 meters in open spaces without significant obstacles, and a claimed latency of less than 0.05 seconds makes the kit suitable for live monitoring and broadcasts. The receiver has a UVC output, allowing it to be connected directly to a computer and used as a video capture card for OBS, vMix, and other popular software. LCD displays on the transmitter and receiver allow you to quickly monitor connection status, signal strength, channel, and resolution.     Key Benefits The key feature of the VRRIIS WL087 Pro is its versatility. The kit can work with both the DJI Osmo Pocket 3 and HDMI sources, making it useful not only for mobile vlogging but also for studio, event, and gameplay filming. Support for the 5GHz band and 20 selectable anti-interference channels helps reduce interference and flexibly adapt the system to the work site. A single transmitter can simultaneously operate with up to five receivers, which is especially convenient for multi-monitor monitoring on set, at a conference, or during a broadcast. Technical specifications Model: VRRIIS WL087 Pro Device type: Wireless HDMI transmitter and receiver Purpose: Wireless video transmission for monitoring, streaming, and video recording Camera Compatibility: DJI Osmo Pocket 3 via Type-C male connector Additional video input of the transmitter: HDMI Supported transmission resolution: 1080P@60Hz Maximum transmission distance: up to 500m / 1640 ft in open space without obstacles Signal delay: less than 0.05 seconds Operating range: 5GHz Number of channels: 20 manually selectable anti-interference channels Channel control: independent switching on transmitter and receiver Streaming receiver output: UVC Software Compatibility: OBS, vMix, and other popular streaming software LCD display: yes, to show connection status, signal, channel and resolution Operating scheme: 1 TX can work simultaneously with 5 RX Power: NP-F batteries, USB-C, DC Compatible batteries: Sony NP-F970 / F750 / F550 Mounting: 1/4" threaded hole Usage format: plug-and-play for pre-paired TX + RX kit Support: Manual frequency tuning and quick re-pairing Important: Camera and batteries are not included.     Transmission distance when working with multiple receivers 1TX → 1RX: Up to 500 meters / 1640 feet 1TX → 2RX: Up to 450 meters / 1500 feet 1TX → 3RX: up to 400 meters / 1312 feet 1TX → 4RX: Up to 300 meters / 990 feet 1TX → 5RX: Up to 200 meters / 656 feet Features and Capabilities The VRRIIS WL087Pro transmitter can be directly connected to the DJI Osmo Pocket 3 via a Type-C male connector, making it particularly convenient for mobile filming without the need for additional adapters. The inclusion of an HDMI port expands the system's range of applications, allowing it to be used with laptops, game consoles, media players, and other devices with HDMI video output. The receiver is equipped with a UVC output, allowing it to be directly connected to a computer and used as a video capture device without a separate capture card. This solution is suitable for live broadcasts, webinars, online lessons, interviews, streams, and presentations where you need to quickly output a wireless video signal to OBS, vMix, or similar software. The system operates in the 5GHz band and supports 20 channels with manual selection. This makes it easier to avoid congested frequencies and find a stable communication channel on-site. An LCD display on each module allows you to instantly check the connection status, eliminating guesswork while filming.     Use cases The VRRIIS WL087Pro is suitable for vlogging with the DJI Osmo Pocket 3, interviews, multi-camera monitoring, online broadcasts, lectures, conferences, training, church broadcasts, corporate events, and mobile video production. The ability to simultaneously connect up to five receivers makes the kit especially convenient for applications where multiple team members—a director, camera operator, technician, or client—need to monitor the signal.     Pairing the transmitter and receiver Turn off TX and RX, disconnect all cables. Connect HDMI IN of the transmitter to HDMI OUT of the receiver using a 1 meter long HDMI cable. Turn on both devices and wait about 25 seconds. Once the “Pair OK” message appears on the LCD and flashes, complete the procedure. Disconnect the HDMI cable and turn off TX and RX. Connect the system as normal and use it as intended.   Equipment: Wireless transmitter - 1 pc. Wireless receiver - 1 pc. Power supply 5 V, 2 A - 2 pcs. USB-C power cable - 2 pcs. USB-C to USB 3.0 cable - 1 pc. HDMI cable 30cm. — 1 pc. Carrying case - 1 pc. User manual - 1 copy.   Notes Actual transmission range depends on operating conditions, presence of obstacles and level of radio interference. Batteries are not included. At least 1 TX transmitter and 1 RX receiver are required for operation. When purchasing TX or RX separately, the devices must be pre-paired before use. The kit does not include the DJI Osmo Pocket 3 camera. ..

• Brand: VRRIIS
• SKU: WL087Pro
• Product Code: VRRIIS WL087 Pro
• Availability: In Stock

Tags: VRRIIS WL087Pro, DJI Osmo Pocket 3, wireless HDMI system, wireless HDMI extender, HDMI transmitter, HDMI receiver, UVC output, OBS, vMix, 1080P60, 5GHz, video transmitter, video receiver, streaming, vlogging, video monitoring, HDMI kit, wireless video transmission