Lensgo DM2 Lapel omnidirectional microphone
The Lensgo DM2 lapel microphone is equipped with a professional sound chip, so the microphone reduces the influence of wind noise and echo, providing a clearer voice. The control unit is made of high quality ABS plastic. The microphone is ideal for recording interviews, video vlogs, live broadcasts, voice and video recording, ASMR. Professional recording quality: The omnidirectional lavaliere microphone provides a flatter AFC in the frequency range: 50KHZ-20KHZ and high sensitivity: -45dB ±3dB, it allows you to record clear and "honest" sound around the microphone. These characteristics allow the Lensgo DM2 microphone to pick up your voice without distortion compared to the built-in microphone in your cell phone. Technical Specifications: Directionality pattern: omnidirectional microphone Cable length: 6 meters Gain control: 0dB, +10dB High pass filter: Low pass filter function Sound monitoring: Headphone jack Battery life: Up to 120 hours Material: ABS Frequency Range: 50-20KHZ Sensitivity: -45dB ±3dB, 0B=1V/PA, 1KHZ Signal/noise ratio: 58dB Power source: one AAA battery Audio output: 3.5mm TRS Output socket for monitoring An important feature of the Lensgo DM2 lavaliere microphone is the headphone jack for monitoring the recorded signal. This feature comes in handy for those who will use the microphone to record AFMR or interviews and record video to a smartphone or camera that does not have a signal monitoring output. This way you can always monitor the signal level and hear exactly what is being recorded into your smartphone. Signal Boost The Lensgo DM2 microphone has a built-in signal amplifier. You can easily add +10dB to the volume if needed. Low Pass Filter This function is used to clean the sound of extraneous low-frequency noise, hum, and vibration. The low-pass filter removes "subwoofer" sounds, creating a more pleasant listening experience by eliminating unintelligible hum. You only need one AAA battery to operate the microphone, which can power the loop microphone for up to 120 hours. The Lensgo DM2 microphone is compatible with both a smartphone and a camera. Select the operating mode on the control unit: when connecting the microphone to a computer or video camera it is "ON", for smartphone mode it is "OFF", make sure you use the correct mode to match your device. The microphone cable is 6 meters long, allowing you to work comfortably with the microphone at a great distance from the camera. There is a huge difference between speaking directly into the camera, into the built-in microphone and using an external lavaliere microphone when recording. The Lensgo DM2 Loop Mic helps you record loud and clear sound when interviewing, live podcasting, Skype calls, teaching, recording audio/video on YouTube and so on. Note: Remove the battery from the control unit when storing for long periods of time. Lensgo DM2 package: 1x Microphone system 1x Metal Clip 1x Windshield 1x Handbook 1x Carrying bag 1x Cable reel ..
- Brand: Lensgo
- SKU: Lensgo-DM2
- Product Code: Lensgo DM2
- Availability: Pre-Order
The Lensgo DM2 lapel microphone is equipped with a professional sound chip, so the microphone reduces the influence of wind noise and echo, providing a clearer voice.
The control unit is made of high quality ABS plastic. The microphone is ideal for recording interviews, video vlogs, live broadcasts, voice and video recording, ASMR.
Professional recording quality: The omnidirectional lavaliere microphone provides a flatter AFC in the frequency range: 50KHZ-20KHZ and high sensitivity: -45dB ±3dB, it allows you to record clear and "honest" sound around the microphone.
These characteristics allow the Lensgo DM2 microphone to pick up your voice without distortion compared to the built-in microphone in your cell phone.
Technical Specifications:
- Directionality pattern: omnidirectional microphone
- Cable length: 6 meters
- Gain control: 0dB, +10dB
- High pass filter: Low pass filter function
- Sound monitoring: Headphone jack
- Battery life: Up to 120 hours
- Material: ABS
- Frequency Range: 50-20KHZ
- Sensitivity: -45dB ±3dB, 0B=1V/PA, 1KHZ
- Signal/noise ratio: 58dB
- Power source: one AAA battery
- Audio output: 3.5mm TRS
Output socket for monitoring
An important feature of the Lensgo DM2 lavaliere microphone is the headphone jack for monitoring the recorded signal.
This feature comes in handy for those who will use the microphone to record AFMR or interviews and record video to a smartphone or camera that does not have a signal monitoring output.
This way you can always monitor the signal level and hear exactly what is being recorded into your smartphone.
Signal Boost
The Lensgo DM2 microphone has a built-in signal amplifier. You can easily add +10dB to the volume if needed.
Low Pass Filter
This function is used to clean the sound of extraneous low-frequency noise, hum, and vibration. The low-pass filter removes "subwoofer" sounds, creating a more pleasant listening experience by eliminating unintelligible hum.
You only need one AAA battery to operate the microphone, which can power the loop microphone for up to 120 hours.
The Lensgo DM2 microphone is compatible with both a smartphone and a camera. Select the operating mode on the control unit: when connecting the microphone to a computer or video camera it is "ON", for smartphone mode it is "OFF", make sure you use the correct mode to match your device.
The microphone cable is 6 meters long, allowing you to work comfortably with the microphone at a great distance from the camera. There is a huge difference between speaking directly into the camera, into the built-in microphone and using an external lavaliere microphone when recording. The Lensgo DM2 Loop Mic helps you record loud and clear sound when interviewing, live podcasting, Skype calls, teaching, recording audio/video on YouTube and so on.
Note: Remove the battery from the control unit when storing for long periods of time.
Lensgo DM2 package:
- 1x Microphone system
- 1x Metal Clip
- 1x Windshield
- 1x Handbook
- 1x Carrying bag
- 1x Cable reel
Sort